Neumann KH 120 II 2.1 DSP Studio Monitor Bundle

Perfect Your Neumann KH DSP Studio Monitors

The Neumann KH 120 II DSP Studio Monitor Bundle gives you everything you need for full DSP control of your audio! This packages includes a set of KH 120 II Studio Monitors and a KH 750 Subwoofer.

Whats included in this bundle:

2 x Neumann KH 120 II Powered 2-way DSP monitors.

1 x Neumann KH 750 DSP Powered Subwoofer.

1 x Neumann MA 1 Monitor Alignment Microphone and Calibration System.

Whats not included: 

2 x Studio monitor stands - Chat to us for options. 

1 x Professional Surround monitor controller - Chat to us for options.

1 x All required cabling from your mixer or monitor controller.

Perfect Sound with a Small Footprint
The KH 120 II has an exceptionally linear frequency response from 44 Hz to 21 kHz (±3 dB). Not only that: It also linearizes the phase response! Which translates to clear mids with astonishing transparency as well as extreme accuracy in the time domain: precise impulse reproduction and finely resolved reverbs. This is made possible by DSP controlled electronics which allow for sophisticated crossovers avoiding the phase distortion caused by analog filters. The internal DSP also realizes new standards in tonal consistency. The KH 120 II is made to extremely low tolerances of no more than ±0.5 dB!  And you can hear it, too: Stereo imaging is razor-sharp. The KH 120 II is designed for nearfield applications with a recommended listening distance of 1 – 2 meters (3 – 6 ft.). It is thus ideally suited to smaller rooms such as home and project studios as well as mixing and editing suites or as a surround speaker in large multichannel applications. Thanks to its outstanding linearity in a portable format, the KH 120 II is also an excellent choice for creating a professional quality makeshift control room when working on location (e.g. orchestra/choir, live recording, film, broadcast).

Ready for Your Room
Even the best loudspeaker only sounds as good as the acoustic environment allows. Neumann’s Mathematically Modelled Dispersion™ (MMD) waveguide guarantees a wide sweet spot and minimizes desk reflections. But the KH 120 II goes much further: Its internal DSP allows for room calibration via Neumann’s revolutionary Automatic Monitor Alignment. MA 1 (sold separately) makes sure your DSP powered monitors are optimally adapted to the character of your room and perfectly aligned for your listening position. Even in acoustically treated rooms, this results in a significant improvement. Tonal compatibility with other KH line studio monitors makes it possible to use the KH 120 II in mixed setups e.g. in immersive setups. For flexible connectivity the KH 120 II features both analog and S/PDIF inputs.

Energy Efficient
Neumann engineers took great care to develop a patent pending amplifier technology which combines superior audio performance with the energy efficiency of Class D. Although the power amplifiers of the KH 120 II deliver up to 145 W to the 5.25” woofer and 100 W to the 1” tweeter, they only consume 17 W at idle. Auto-standby reduces power consumption to 0.3 W when the KH 120 II has not been used for a while, but can be deactivated.

Neumann KH 120 II Studio Monitor Features

• High-precision drivers, Mathematically Modelled Dispersion (MMD) waveguide
• Linear frequency response 44 Hz - 21 kHz (±3 dB)
• Linear phase response 120 Hz - 16 kHz (±45°) with latency <2.6 ms
• DSP inside allows for room adaptive alignment via Neumann’s MA 1
• Razor sharp imaging due to extremely low tolerances (±0.5 dB)
• May be combined with other KH line speakers in immersive or surround setups

Specifications

• Frequency Response:  44 Hz - 21 kHz
• Self-Generated Noise:  <20 dB(A) SPL
• Max. SPL:  116.8 dB SPL
• Acoustical Principle:  Bassreflex, Ports at the front
• Analog Input(s):  XLR: analog electronically balanced
• Analog Input Impedance:  24k Ohms
• Digital Input(s):   RCA (75 Ω), S/PDIF
• Input Gain Control (Sensitivity):  0 dB to -15 dB
• Output Level Control:  94; 100; 108; 114 dB SPL
• Equalization Bass:  0; -2; -4; -6 dB
• Equalization Low-Mid:  0; -2; -4; -6 dB
• Equalization Treble:  +1; 0; -1; -2 dB
• Control:  Local; Network
• Crossover Frequency:  1.7 kHz
• FIR Phase Correction:   Linear phase (120 Hz to 16 kHz; +/- 45°)
• Protection Circuitry:  Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers
• Output Power Woofer Amplifier (THD+N with limiter deactivated: 10%):  145 W
• Output Power Tweeter Amplifier (THD+N with limiter deactivated: 10%):  100 W
• Woofer:  130 mm (5.25") with protecting metal grill
• Tweeter:  25 mm (1") with protecting metal grill

By combining the KH 750 DSP with the freely available iPad® app (version 3.0 or newer), the subwoofer becomes the intelligent control center of every Neumann stereo setup. In addition to the KH 80 DSP, the KH 120, KH 310 and KH 410** analogue monitors now also benefit from the DSP power of the KH 750 DSP.

The iPad® connects to the subwoofer via a standard IP network with an Ethernet cable between the router and subwoofer. The stereo pair receives the analog audio signal directly from the subwoofer.

Main features:

• 10″ DSP Powered Subwoofer
• Designed for Small Rooms & Monitors
• 18 to 300 Hz Response
• Can Handle up to 105 dB SPL
• Integrates with Neumann Monitors
• Ethernet Control over Alignment & Setup
• Low-Pass Filtering, 180° Phase Inversion
• Analog XLR & BNC-AES I/O
• For LFE or Sub Channels

Tech Specs: 

• Powered: Yes
• Speaker Size: 10"
• Driver Type: Long-throw with Pressed-steel basket
• Total Power: 256W
• Frequency Range: 20Hz-300Hz
• Crossover Frequency: 80Hz
• Maximum Peak SPL: 105 dB SPL @ 1m
• Input Types: 2 x XLR
• Output Types: 2 x XLR
• Other I/O: AES3 In/Out (digital)

Neumann MA 1 Automatic Monitor Alignment Features:

• Provides automatic monitor alignment for KH 80 DSP loudspeakers or non-DSP KH monitors via a KH 750 DSP subwoofer
• Employs calibration algorithms developed in cooperation with Fraunhofer IIS
• Comes with an individually calibrated measurement microphone
• Adjusts the frequency curve of your DSP-powered monitors
• Optimizes the amplitude response and phase of all the speakers in your setup
• Calibration settings stored directly inside of your DSP-powered monitors — no plug-in required
• Ethernet connections may be disconnected after optimization has been completed

Tech Specs:

• Microphone Type:Pressure Transducer
• Polar Pattern:Omnidirectional
• Frequency Response:20Hz-20kHz
• Max SPL:132dB
• Output Impedance:50 ohms
• Signal to Noise Ratio:67dB (A weighted)
• Self Noise:27dB (A weighted)
• Sensitivity:30mV/Pa (-30 dB)
• Connector:XLR