Violectric HPA V222 Headphone Amplifier
Tax included.
Description
One of the most powerful headphone amps out there
Introducing the Violectric HPA V222, a new balanced headphone amplifier from the Violectric range. As a true symmetrical amplifier, it offers four output stages and not just symmetrical connection options. It follows on from the multi-award winner HPA V200 and HPA V280 and offers the incomparable natural and pleasant sound that made its predecessors famous.
Overview
The HPA V222 not only offers one of the most powerful headphone amplifiers on the market but also enhances:
Lowest noise - due to a very small internal gain. As a result, the inherent noise of the amplifiers is inaudible.
High output voltage - due to 50 volt internal operating voltage. Therefore ideally suited for high-impedance headphones.
High output power - through powerful amplifiers that can deliver far more power than even the most demanding headphone can need. Therefore ideally suited for headphones with low impedances and also magnetostats.
High damping factor - due to the lowest output impedance. Therefore ideally suited to control even the most difficult headphones without influencing them with a guarantee for an uncompromising frequency response.
Functions:
The rear line inputs can be selected via switches on the front. After the RK 27 volume control, the activated and buffered signal reaches the power amplifiers, which are a further development of the famous V200 circuits. Connect your headphones to the HPA V222 and enjoy a compact and fantastic-sounding headphone amplifier with the famous natural, smooth but precise Violectric sound
Main features:
Tech Specs:
- Type: Headphone Amp
- Form Factor: Tabletop
- Stereo Inputs: 1x Stereo (XLR), 1x Stereo (Cinch)
- Stereo Outputs: 1x 6.3 mm jack (unbalanced), 1x Pentaconn (symmetrical), 1x 4-pin XLR (balanced)
- Input Controls: XLR, Pentaconn, Jack
- Max. input voltage: + 21 dBu
- Frequency range: 5 Hz ... 250 kHz (- 0,5 dB)
- Input impedance: 10 Ohms
- Output impedance: 0,25 Ohm unbalanced, 0,5 Ohm balanced
- Dynamic range: >131 dB (A-wtd)
- Noise: <-102 dBu (A-wtd)
- Crosstalk: -100 dB (1 kHz) / -95 dB (15 kHz)
-
Power Supply: Internal 230 V / 115 V AC
- Height: 65 mm
- Width: 170 mm
- Depth: 252 mm
- Weight: 3.1 kg
- Discover more Violectric [HPA V222]: https://www.violectric.de/en/products/headphone-preamps/violectric-hpa-v222
But If you want to confirm availability first or inquire for possible discounts send us a quick mail or open the chat tab.
This Months Staff Picks
Hot Gear News
Matte-Black BCM 104 and BCM 705 Announced
Neumann is announcing two matte-black variants of its most popular mics, the BCM 104 mt and the BCM 705 mt. The BCM series has long been the go-to option for high-quality results in the radio, str...
Cranborne Audio Carnaby HE 2 Harmonic EQ
Harmonic EQ Evolution Carnaby HE2 HarmonicEQ utilises the same unique and revolutionary EQ concept found in Carnaby 500, using harmonic saturation to boost and cut frequency content. Enhance your...
Audient ORIA Immersive Audio Interface
ORIA’s Advanced Speaker Processing lets you calibrate your room and create custom onboard calibration Profiles (presets) for any monitoring format from stereo to surround to 9.1.6 immersive setups...
New SSL Pure Drive Quad & Octo Microphone Preamps
Mic Pre’s with Prestige: Solid State Logic Launch PURE DRIVE QUAD And PURE DRIVE OCTO Microphone Preamplifiers.Solid State Logic has announce the launch of two new 2U rack-based studio tools: the...
TRANSFORM YOUR TONE WITH THE MTB For over six decades, audio transformers have been the bedrock of Mr. Rupert Neve’s audio circuit design philosophy – and Rupert Neve Designs’ bespoke transformer...
HEDDphone Two is out! Pre-order now
Lighter, better, faster, stronger. Handmade in Berlin using high-quality components, the HEDDphone TWO puts HEDD's (Heinz ElectroDynamic Designs) expertise at your disposal, with the newest Air Mo...
