Focusrite RedNet HD32R

Focusrite RedNet HD32R

32-Channel Bridge between Dante Networks and Pro Tools|HD RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to...

Vendor :Focusrite

Type :Audio Interfaces

R26,375.00

Add to wishlist

32-Channel Bridge between Dante Networks and Pro Tools|HD

RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports. HD32R acts as a 64-channel (32 in/32 out) digital break in/out box, operating in the same way as a standard interface, and supporting a wide range of Pro Tools|HDX and HD cards. Up to six HD32R modules can be used with a Pro Tools|HDX system and three with Pro Tools|HD, allowing the maximum channel count for either. The HD32R features a rugged, roadworthy exterior and high internal build quality, with Ethernet and power supply redundancy. In addition, it offers a compact 1U rack-mount form factor for a full 32 channels of I/O.

Rednet HD32R

Key Features

  • Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX 
  • Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors
  • Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD
  • Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces
  • Permits multiple workstations to access the same interface hardware and I/O 
  • No changes to Pro Tools workflow required - simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs
  • Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R
  • Additional Avid/Digidesign interfaces may be connected to expansion ports
  • Upgrade to RedNet interfaces while remaining fully compatible with TDM- or AAX-DSP-based plugins and saved sessions

Rednet HD32R Half

Specifications

RedNet HD32R Back

Digital Performance

Supported Sample Rates

44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit

Clock Sources

Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master.

External Word Clock Range

Nominal sample rate ±7.5%

Rear Panel Connectivity

Pro Tools|HD

Primary Port

1 x Mini DigiLink

Expansion Port

1 x Mini DigiLink

Loop Sync

Word Clock Input

1 x BNC 75? port

Word Clock Output

1 x BNC 75? port

Word Clock

Word Clock Input

1 x BNC 75? port (switchable termination)

Word Clock Output

1 x BNC 75? port

PSU & Network Connections

PSU

2 x IEC Inputs with retaining clips.

Network

2 x etherCON connectors, also compatible with standard RJ45 connectors.

Front Panel Indicators

Primary PSU (A)

Green LED. Illuminates when an AC input is applied and all DC outputs are present.

Primary PSU (B)

Green LED. Illuminates when an AC input is applied and all DC outputs are present.

Primary Network

Green LED. Indicates that a network connection is present on primary port when in redundant mode. When in Switched mode, a valid network connection at either Primary or Secondary network port will cause this LED to illuminate.

Secondary Network

Green LED. Indicates that a network connection is present on secondary port when in redundant mode. Not used in switched mode.

Network Locked

Green LED. When unit is network slave, shows valid network lock. When unit is network master, shows lock to indicated clock source. Flashing indicates external clock is selected but not connected.

Sample Rate

Orange LED for each: 44.1 kHz, 48 kHz, x2, x4.

Pull Up/Down

Orange LED. Indicates unit is set to operate on a Dante pull up/down domain.

Signal Indicators

16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS.

Clock Source

Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master.

Network Modes

Redundant

Allows unit to connect two independent networks.

Switched

Connects both ports to integrated network switch allowing daisy-chaining of device.

Dimensions

Height

44.5mm/ 1.75"

Width

482.6mm/ 19"

Depth

263mm/ 10.35"

Weight

Weight

3.9kg

Power

PSU

2 x Internal, 100-240V, 50/60Hz, consumption 30VA.

Heat Performance

Operating Temperature

Operates at up to an ambient temperature of 50 degrees Celcius

Buy the Focusrite RedNet HD32R from Audiosaurus today. The Pro Audio specialists in South Africa.

If you have any further questions about this product, get in touch with us via our website https://www.audiosaurus.co.za/pages/contact

 OR

Facebook - https://www.facebook.com/audiosaurusZA/