Focal Trio 6 Be - Pair

Focal Trio 6 Be - Pair

Amazingly powerful 3-way studio reference monitor with 8" subwoofer, 5" woofer, and 1" tweeter  Focal Trio6 Be at a Glance: It's also a compatible 2-way...

Vendor :Focal Professional

Type :Studio Monitors

R84,995.00

Add to wishlist

Amazingly powerful 3-way studio reference monitor with 8" subwoofer, 5" woofer, and 1" tweeter 

Focal Trio6 Be at a Glance:
  • It's also a compatible 2-way reference
  • Optimized bass response in both modes
  • Hear the advantages of Focal's Beryllium inverted-dome tweeter
  • W composite sandwich cone helps optimize frequency response

FOCUS MODE

Switching to FOCUS mode re-configures Trio6 Be in two-way mode.

THREE-WAY MONITOR
1” tweeter, a 5” woofer, and an 8” subwoofer 

When utilized to its full potential, the Beryllium tweeter reaches up to 40kHz and the 8” subwoofer extends low frequencies down to 35Hz. This offers engineers complete control of the audio signal. 

The 8” W composite sandwich cone subwoofer is complemented by its large port integrated into the front baffle, making it easy to position the monitor near the front wall without saturating the ports and maintaining excellent low-frequency linearity. Its large front port guaranties consistent performance regardless of SPL levels. It also allows a positioning closed to a wall without wall boost effect, allowing an easy integration even in small rooms.

The 5” W composite sandwich cone woofer is installed in an isolated chamber within the cabinet that prevents the sympathetic activation of its other speakers while optimising its acoustic performance. Two front-facing ports provide bass reflex, enabling the woofer to perform identically in both two-way (90Hz – 2.5kHz) and three-way (250Hz – 2.5kHz) configurations. 

The 1” pure Beryllium inverted dome tweeter provides numerous advantages, including wide dispersion, amazing frequency response linearity, quick dynamics, and unrivaled impulse response. 

As a two-way speaker, Trio6 Be employs only the 5” woofer and the tweeter, limiting frequencies to between 90Hz and 20kHz. This configuration provides the perfect compromise when checking the quality of the mix for playback systems with limited frequency response, such as TVs, PCs, cars, and portable speaker systems. The frequency response curve of the two-way configuration is identical, though less extended, to its three-way curve, allowing for a perfect comparison that preserves the stereo image. Focusing on this critical middle frequency range facilitates a good mix and enables the engineer to ensure that the levels are just right. A footswitch (not included) activates this configuration remotely from the listening position.

A ¼” input jack on the rear panel receives the trigger signal from a remote pedal, while a ¼” output sends a link to the input on a paired monitor.
Most singlebutton guitar amplifier footswitches are compatible.

ROTATING BAFFLE

Trio6 Be may be used vertically or horizontally to optimize positioning thanks to an adjustable aluminum baffle housing the woofer and tweeter.

This rotating baffle is capable of rotating 360° in 90° increments, making it one of the most versatile speakers to position.

KEY POINTS

  • Two monitors in one with remote switching: a quick and effective way to compare the mix translated to a compromised speaker system
  • Wide uncompromised dynamics, linearity, and wide dispersion produced by Beryllium inverted dome tweeter: state-of-the-art speaker design and material 
  • Neutral, distortion-free sound thank to W composite sandwich cone 
  • Rotating baffle: facilitates both horizontal and vertical setups
  • Simplified room integration, thank to LF and HF shelving, 160Hz EQ 
  • High SPL accommodates all musical styles (115dB peak @ 1m)
  • FOCUS mode (two-way or three-way configuration): Remote pedal (not supplied)
  • Low and high frequencies & 160Hz notch adjusting: three control knobs 
Focal Trio6 Be Features:
  • 3-way, 2-way: two monitors in one with remote switching
  • Focus (2-way) mode is an ideal way to hear your mix on a bandwidth-limited reference
  • Uncompromised dynamics, linearity, and wide dispersion
  • Beryllium inverted dome tweeter: state-of-the-art speaker design and material
  • W composite sandwich cone woofer and sub for neutral, distortion-free sound
  • Rotating baffle facilitates both horizontal and vertical orientation in your studio
  • LF and HF shelving, 160Hz EQ, for simplified room integration
  • Bespoke tri-amplification for effortless performance:
    • 8" subwoofer: 200W Class G
    • 5" woofer: 150W Class G
    • 1" tweeter: 100W Class AB
  • High-SPL design (115dB peak @ 1m) accommodates all musical styles
  • Remote pedal jack (pedal not supplied) for toggling Focus mode
  • Most 1-button guitar amp footswitches are compatible

Step up to a true reference monitor: the Focal Trio6 Be!

Tech Specs

Powered Yes
Power Configuration Tri-amped
LF Driver Size 8" (Low), 5" (Mid)
LF Driver Type Cone
LF Driver Material Composite
HF Driver Size 1"
HF Driver Type Inverted Dome
HF Driver Material Beryllium
LF Driver Power Amp 200W (Low), 150W (Mid)
HF Driver Power Amp 100W
Total Power 450W
Frequency Range 35Hz-40kHz
Maximum Peak SPL 115 dB (3-way), 105 dB (2-way)
Enclosure Type Ported
Input Types 1 x XLR, 1 x 1/4"
Output Types 1 x 1/4"
Height 20.5"
Width 10.94"
Depth 14.19"
Weight 44 lbs.