RØDE NT1-A Studio Mic Kit
Tax included.
Description
The KIT to KICK-up your sound
The RØDE NT1-A 1 cardioid condenser microphone has become an industry standard since its origins in Australia; delivering the warmth, extended dynamic range, clarity and high SPL capability typically only featured on some of the most expensive microphones. With a self noise level of only 5dBA it is widely recognised as the world's quietest studio microphone. This low noise makes it ideal for vocal recording as well as voice overs and environmental recording.
Main features:
- Revered cardioid condenser microphone with a large 1'' capsule and gold-plated diaphragm
- Features high SPL handling capabilities often only found on some of the most expensive microphones
- Cardioid polar pattern provides excellent isolation of your vocals or other sound source
- Transformerless surface-mount circuitry for ultra-low noise operation with a self-noise figure of only 5dB(A)
- The extended dynamic range allows you to capture both detail and power with exceptional clarity
- True externally-biased condenser microphone design
- The capsule is internally shock mounted to dramatically reduce handling and mechanical noise
- 3-pin XLR output with gold-plated contacts
- A complete vocal recording solution - includes an SM6 shock mount, pop filter, and a 6-metre XLR cable
- Also a perfect choice for recording guitars and percussion instruments
- Designed and manufactured in Australia
- 10 year extended warranty when you register your microphone with Rode
Tech Specs:
- Microphone Type: Condenser
- Capsule Size: 25mm / 1''
- Polar Pattern: Cardioid
- Address Type: Side
- Frequency Range: 20Hz - 20kHz
- Output Impedance: 100 Ohms
- Maximum SPL: 137dB (at 1kHz, 1 percent THD into 1 kOhm)
- Maximum Output Level: +13.7dBu (at 1kHz, 1 percent THD into 1 kOhm)
- Sensitivity: -31.9dB re 1Volt/Pascal (25.00mV at 94dB SPL), +/-2dB at 1kHz
- Dynamic Range: >132dB (per IEC651)
- Equivalent Noise Level: 5dB (A-weighted)
- Signal-to-Noise: 88dB SPL (at 1kHz, rel 1Pa per IEC651)
- Power Options: Phantom power (P24 / P48)
- Output Connector: 3-pin XLR, balanced output between Pin 2 (+), Pin 3 (-), and Pin 1 (ground)
- Dimensions: 190mm x 50mm x 50mm / 7.48'' x 1.97'' x 1.97'' (H x W x D)
- Weight: 326g
But If you want to confirm availability first or inquire for possible discounts send us a quick mail or open the chat tab.
This Months Staff Picks
Hot Gear News
Cranborne Audio Carnaby HE 2 Harmonic EQ
Harmonic EQ Evolution Carnaby HE2 HarmonicEQ utilises the same unique and revolutionary EQ concept found in Carnaby 500, using harmonic saturation to boost and cut frequency content. Enhance your...
Audient ORIA Immersive Audio Interface
ORIA’s Advanced Speaker Processing lets you calibrate your room and create custom onboard calibration Profiles (presets) for any monitoring format from stereo to surround to 9.1.6 immersive setups...
New SSL Pure Drive Quad & Octo Microphone Preamps
Mic Pre’s with Prestige: Solid State Logic Launch PURE DRIVE QUAD And PURE DRIVE OCTO Microphone Preamplifiers.Solid State Logic has announce the launch of two new 2U rack-based studio tools: the...
TRANSFORM YOUR TONE WITH THE MTB For over six decades, audio transformers have been the bedrock of Mr. Rupert Neve’s audio circuit design philosophy – and Rupert Neve Designs’ bespoke transformer...
HEDDphone Two is out! Pre-order now
Lighter, better, faster, stronger. Handmade in Berlin using high-quality components, the HEDDphone TWO puts HEDD's (Heinz ElectroDynamic Designs) expertise at your disposal, with the newest Air Mo...
Solid State Logic B-Series Dynamics 500 Series Module
Check out the brand new 500 Series Module with Compressor/Limiter and Gate/Expander from SSL. The 4000 B Dynamics (B-DYN) 500 series module takes the dynamics processor found in the channel strip ...
